浮点运算中的清零行为

本文介绍了浮点运算中的清零行为的处理方法,对大家解决问题具有一定的参考价值

问题描述

While, as far as I remember, IEEE 754 says nothing about a flush-to-zero mode to handle denormalized numbers faster, some architectures offer this mode (e.g. http://docs.sun.com/source/806-3568/ncg_lib.html ).

In the particular case of this technical documentation, standard handling of denormalized numbers is the default, and flush-to-zero has to be activated explicitly. In the default mode, denormalized numbers are also handled in software, which is slower.

I work on a static analyzer for embedded C which tries to predict correct (if sometimes imprecise) ranges for the values that can happen at run-time. It aims at being correct because it is intended to be usable to exclude the possibility of something going wrong at run-time (for instance for critical embedded code). This requires having captured all possible behaviors during the analysis, and therefore all possible values produced during floating-point computations.

In this context, my question is twofold:

  1. among the embedded architectures, are there architectures that offer only flush-to-zero? They would perhaps not have to right to advertise themselves as "IEEE 754", but could offer close-enough IEEE 754-style floating-point operations.

  2. For the architectures that offer both, in an embedded context, isn't flush-to-zero likely to be activated by the system, in order to make the reaction time more predictable (a common constraint for these embedded systems)?

Handling flush-to-zero in the interval arithmetic that I use for floating-point values is simple enough if I know I have to do it, my question is more whether I have to do it.

解决方案

Yes to both questions. There are platforms that support flush-to-zero only, and there are many platforms where flush-to-zero is the default.

You should also be aware that many embedded and dsp platforms use a "Denormals Are Zero" mode, which is another wrinkle in the floating-point semantics.


Edit further explanation of FTZ vs. DAZ:

In FTZ, when an operation would produce a denormal result under the usual arithmetic, a zero is returned instead. Note that some implementations always flush to positive zero, whereas others may flush to either positive or negative zero. It's probably best not to depend on either behavior.

In DAZ, when an input to an operation is a denormal, a zero is substituted in its place. Again, there's no general guarantee about which zero will be substituted.

Some implementations that support these modes allow them to be set independently (and some support only one of the two), so it may be necessary for you to be able model either mode independently as well as together.

Note also that some implementations combine these two modes into "Flush to Zero". The ARM VFP "flush to zero" mode is both FTZ and DAZ, for example.

这篇关于浮点运算中的清零行为的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,WP2

admin_action_{$_REQUEST[‘action’]}

do_action( "admin_action_{$_REQUEST[‘action’]}" )动作钩子::在发送“Action”请求变量时激发。Action Hook: Fires when an ‘action’ request variable is sent.目录锚点:#说明#源码说明(Description)钩子名称的动态部分$_REQUEST['action']引用从GET或POST请求派生的操作。源码(Source)更新版本源码位置使用被使用2.6.0 wp-admin/admin.php:...

日期:2020-09-02 17:44:16 浏览:1127

admin_footer-{$GLOBALS[‘hook_suffix’]}

do_action( "admin_footer-{$GLOBALS[‘hook_suffix’]}", string $hook_suffix )操作挂钩:在默认页脚脚本之后打印脚本或数据。Action Hook: Print scripts or data after the default footer scripts.目录锚点:#说明#参数#源码说明(Description)钩子名的动态部分,$GLOBALS['hook_suffix']引用当前页的全局钩子后缀。参数(Parameters)参数类...

日期:2020-09-02 17:44:20 浏览:1032

customize_save_{$this->id_data[‘base’]}

do_action( "customize_save_{$this->id_data[‘base’]}", WP_Customize_Setting $this )动作钩子::在调用WP_Customize_Setting::save()方法时激发。Action Hook: Fires when the WP_Customize_Setting::save() method is called.目录锚点:#说明#参数#源码说明(Description)钩子名称的动态部分,$this->id_data...

日期:2020-08-15 15:47:24 浏览:775

customize_value_{$this->id_data[‘base’]}

apply_filters( "customize_value_{$this->id_data[‘base’]}", mixed $default )过滤器::过滤未作为主题模式或选项处理的自定义设置值。Filter Hook: Filter a Customize setting value not handled as a theme_mod or option.目录锚点:#说明#参数#源码说明(Description)钩子名称的动态部分,$this->id_date['base'],指的是设置...

日期:2020-08-15 15:47:24 浏览:866

get_comment_author_url

过滤钩子:过滤评论作者的URL。Filter Hook: Filters the comment author’s URL.目录锚点:#源码源码(Source)更新版本源码位置使用被使用 wp-includes/comment-template.php:32610...

日期:2020-08-10 23:06:14 浏览:903

network_admin_edit_{$_GET[‘action’]}

do_action( "network_admin_edit_{$_GET[‘action’]}" )操作挂钩:启动请求的处理程序操作。Action Hook: Fires the requested handler action.目录锚点:#说明#源码说明(Description)钩子名称的动态部分$u GET['action']引用请求的操作的名称。源码(Source)更新版本源码位置使用被使用3.1.0 wp-admin/network/edit.php:3600...

日期:2020-08-02 09:56:09 浏览:848

network_sites_updated_message_{$_GET[‘updated’]}

apply_filters( "network_sites_updated_message_{$_GET[‘updated’]}", string $msg )筛选器挂钩:在网络管理中筛选特定的非默认站点更新消息。Filter Hook: Filters a specific, non-default site-updated message in the Network admin.目录锚点:#说明#参数#源码说明(Description)钩子名称的动态部分$_GET['updated']引用了非默认的...

日期:2020-08-02 09:56:03 浏览:834

pre_wp_is_site_initialized

过滤器::过滤在访问数据库之前是否初始化站点的检查。Filter Hook: Filters the check for whether a site is initialized before the database is accessed.目录锚点:#源码源码(Source)更新版本源码位置使用被使用 wp-includes/ms-site.php:93910...

日期:2020-07-29 10:15:38 浏览:809

WordPress 的SEO 教学:如何在网站中加入关键字(Meta Keywords)与Meta 描述(Meta Description)?

你想在WordPress 中添加关键字和meta 描述吗?关键字和meta 描述使你能够提高网站的SEO。在本文中,我们将向你展示如何在WordPress 中正确添加关键字和meta 描述。为什么要在WordPress 中添加关键字和Meta 描述?关键字和说明让搜寻引擎更了解您的帖子和页面的内容。关键词是人们寻找您发布的内容时,可能会搜索的重要词语或片语。而Meta Description则是对你的页面和文章的简要描述。如果你想要了解更多关于中继标签的资讯,可以参考Google的说明。Meta 关键字和描...

日期:2020-10-03 21:18:25 浏览:1620

谷歌的SEO是什么

SEO (Search Engine Optimization)中文是搜寻引擎最佳化,意思近于「关键字自然排序」、「网站排名优化」。简言之,SEO是以搜索引擎(如Google、Bing)为曝光媒体的行销手法。例如搜寻「wordpress教学」,会看到本站的「WordPress教学:12个课程…」排行Google第一:关键字:wordpress教学、wordpress课程…若搜寻「网站架设」,则会看到另一个网页排名第1:关键字:网站架设、架站…以上两个网页,每月从搜寻引擎导入自然流量,达2万4千:每月「有机搜...

日期:2020-10-30 17:23:57 浏览:1263